Buronomic
Alto sit-stand desk 135x80 with left-hand return
Delivery time: 4 - 6 weeks
Sit-stand corner workstation where the return adjusts in height too, so you can keep working at both tops while standing. Fully configurable to your wishes.
Your data is safe and protected.
Payment by bank transfer/invoice possible
+40 years of experience in office furniture and design
Need advice? Contact our advisors
Own delivery and installation service
-
The Alto sit-stand desk with return combines a straight top of 135 by 80 cm with a return of 70 by 50 cm on the left-hand side. Together they form a corner workstation that adjusts electrically from 63 to 128 cm.
That last point is what matters. On most corner desks the return sits on a fixed leg, so only the main top rises. Here the entire workstation moves along, which lets you carry on working at both tops while standing.
The return gives you room for a second screen, a phone or documents without taking up your main work surface. On a 135 cm desk that makes a noticeable difference.
The control has four programmable positions plus a USB A and a USB C charging port. A gyroscopic sensor in the drive unit detects obstacles while moving.
The top is 25 mm Structurex melamine with four rounded corners and an impact-resistant ABS edge, in Nebraska with a black base. The straight top has a 25 mm deep scallop and two pre-drilled 80 mm cable grommets.
The wood is 100% PEFC certified. Tested over 20,000 cycles across five years, compliant with NF EN 527-1, 527-2 and 527-3, with a five-year warranty.
The Alto sit-stand desk with return combines a straight top of 135 by 80 cm with a return of 70 by 50 cm on the left-hand side. Together they form a corner workstation that adjusts electrically from 63 to 128 cm.
That last point is what matters. On most corner desks the return sits on a fixed leg, so only the main top rises. Here the entire workstation moves along, which lets you carry on working at both tops while standing.
The return gives you room for a second screen, a phone or documents without taking up your main work surface. On a 135 cm desk that makes a noticeable difference.
The control has four programmable positions plus a USB A and a USB C charging port. A gyroscopic sensor in the drive unit detects obstacles while moving.
The top is 25 mm Structurex melamine with four rounded corners and an impact-resistant ABS edge, in Nebraska with a black base. The straight top has a 25 mm deep scallop and two pre-drilled 80 mm cable grommets.
The wood is 100% PEFC certified. Tested over 20,000 cycles across five years, compliant with NF EN 527-1, 527-2 and 527-3, with a five-year warranty.